Life, The Universe, and Everything!
“Half of what I say is meaningless; but I say it so that the other half may reach you.” -- Khalil Gibran
I attached a Raspberry Pi Zero W running CNCJS software to my 3018 “Woodpecker” CNC machine. CNCJS is a web-based gcode feeder than can be used to control the CNC hardware. Being web-based, I...
My Pi Family! (Yeah first to order but last to get … +Namran Hussin and +Zulfadli Sukarno beat me to the Pi 2) (Yeah first to order but last to get … +Namran Hussin...
Now I wonder if it was worth spending all that money on an Intel NUC for a TVPC. But the old Pi (first-gen Model B) I was using was just a bit under powered....
As shipped, the Pi has no real-time clock, and depends on the internet to determine the current time. Since my Pi might run without internet, I added a real-time clock to it. It’s an...
First steps in re-purposing my old Pi: connecting to it via the serial console. Since the Pi’s serial console uses TTL levels, I used a TTL<->RS232 converter I bought locally (http://goo.gl/faOGpi).My wiring from Pi...
Let’s see how long this one remains in the box … Let’s see how long this one remains in the box … Comments (1): 2015-01-02 15:08:35+0800 YeHuat Poh I will help you to open...
Because cannot sleep … This post was originally published publicly on Google+ at 2014-10-11 00:30:58+0800
